; Warning: SVX file generated by Tunnel.  Do not edit.  To change, edit your original files and save on top.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
*begin upperlevellink
*EXPORT 0 8 11 12
*data normal from to tape compass clino ignoreall
*units length metres
*calibrate tape 0.0
*units compass degrees
*calibrate compass 0.0
*units clino degrees
*calibrate clino 0.0
;end generated presettings

;Resurvey from Upper levels down to downstream end of Double Barrel passage


*CALIBRATE declination 2.42
*CALIBRATE clino -2; Set this correction because I think I sighted all my readings too low, as passage gradient was wrong
;surveyors: Footleg, Caroline Fretwell
;date 02/08/2006

;stn 0= stn 10 (carbide marking on boulder) in high level passage survey 
;(need to find out which station number in this file corresponds to stn 10 in old survey)
1	0	5.95	265	35;	0.75	0.75	2.5	0.5
2	1	7.78	292	-1;	0	1	2.5	3
3	2	7.99	245	-2;	3	5	1	0.75
4	3	4.07	-	+v;	2	2	-	0
5	4	8.36	223	24;	1	3	3	0.75
6	5	6.26	264	10;	0	1.5	0.5	1
7	6	10.56	355	-2;	4	0	0.75	2
8	7	9.83	285	10;	2.5	0	1	1.75
9	8	12.02	248	-4;	0	1.5	0.2	1
10	9	6.51	300	-8;	4	2	1	1
11	10	11.70	310	3;	5	0	0.5	1
12	11	17.48	249	1;	3.5	3	1.25	0.4
;stn 12 = old survey marker (orange tape on heap of rocks) at junction with catprint passage

;LRUD data
*data passage station left right up down
0	0.75	0.75	3	0
1	0.75	0.75	2.5	0.5
2	0	1	2.5	3
3	3	5	1	0.75
4	2	2	0	0
5	1	3	3	0.75
6	0	1.5	0.5	1
7	4	0	0.75	2
8	2.5	0	1	1.75
9	0	1.5	0.2	1
10	4	2	1	1
11	5	0	0.5	1
12	3.5	3	1.25	0.4


*end upperlevellink