TODO ---- * Rename [blank].thconfig files to appropriate names (for ease of opening / identification) * Amend Nidderdale.pdf output to more descriptive name "GoydenPotCaveSystem" or simlar? * Expand the presumed connection overlay (presumed vs proven hydro connection) * Need new GPS for all entrances. (Nick - Trimble) * The digitised Sumps (from Sump Index) have no elevation, so this is not reflected in any 3d models etc. (need an altitude from somewhere and fudge it, or real data!) * On PresumedConnections overlay add: * Pigskin > Proudler to Dye Hard Inlet (dye traced) * Pigskin > Covid Way to NG 25m aven * OQP to Astronomers - NO POINT ADDING THIS UNTIL PROPER GPS WORK COMPLETE * Complete Chris' sections surveys (Goyden, New Goyden, Other) for publication - NEED MORE INFORMATION AND COMPLETION OF O/S SURVEYS BEFORE THIS CAN BE COMPLETED * There is something wrong with the stations / warp at the very end of Beetroot Sump * In adobe, the colours of sumps seem odd (see GoydenDownstream - same scrap?) * Fix Joins - Beetroot - Beetroute canal - Stream - Planetarium - Goyden Downstream Sumps (6&7 connection to Aquamole) * need general review / discussion on all leads / add possible continuations * Remove old OSM overlays and equates from main th file - CANNOT DO THIS YET. SOME ENTRANCES ARE ONLY WORKING VIA THE SURFACE EQUATES * Create index level files for main Goyden / NewGoyden, following folder restructure * Create svx versions (low priority) * Compelte cross sections (low priority) * What's "The Spiral"? 'open' passage south of route to the Chapel? MISSING SURVEYS --------------- * Ball of String Passage * New Stream Sump * Limley Pot? * Drum Rift * Carols back passage/re-survey main chamber * low streams by sand tunnel * small passages from 10 foot climb though to Sand tunnel * Pillar Crawls, Pillar Pot Passage, Timber Passage * survey over the Turf plus passage above Chapel chamber - DIGITISED VERSION * Equinox Chamber (between sumps 3 and 4 new goyden) - ROUGH OUTLINE INCLUDED * Upper and lower nurgatory to Main Stream - DIGITISED VERSION INCLUDED * Labryinth - New Stream Passage - DIGITISED VERSION INCLUDED * Limley inlet - DIGITISED VERSION INCLUDED * Carbide tin passage from 5 Ways junction to bottom of the 20 foot climb. - DIGITISED VERSION OTHER ----- * Canal Cave area survey - To highlight Canal cave, river truncating Lofthouse Foss caves 1&2 canal cave and lower canal cave, Perrier pot and another, Lofthouse pot and sink far side of river. Highlight possible link Lofthouse pot to Low Eglin’s. Add to Canal cave Survey rest of pots and surface river, Fire station and cricket ground * Eglin’s System survey - To highlight Eglin system, Use pdf of the system available * Tom Taylor’s and gaps - To highlight gaps between Tom Taylor’s and Low Eglin’s/Tom Taylor’s and Eglin’s Hole, Use pdf of the system available * highlight Dry Wath link/Aquamole series and Frog pot/Hardy Pools and Dry Wath series near link/ Thrope pot and mine levels. How Gill pot * highlight Old Quarry pot, Pigskin, surface features, Planetarium, Astronomers passage, 25m aven and Dye Hard inlet THERION DRAWING STDS RECOMMENDATIONS ------------------------------------ * Labels (use point, not line, align away from passage, split over newline
where appropriate) - ENTRANCES- capitals and XL - Major Landmarks normal case and XL - Minor Landmarks, pitches and climbs, normal case and L - minor comments, M - note, if using arrows with any labels, set size of line arrow to match the label * Water Flow - use point (M) Orientated with flow of water * Passage Slopes - use passage gradient point (M) Orientated down slope (not line) * All other points (M) - Dig, ? etc. *For all Possible Continuations points (?) add the following into options, amended accordingly! -text "tight wet inlet series" -attr who "Phil Walker" -attr what aven -attr priority Low -attr ref elevation #-explored 5m * Pitches - set outline-in to 'view' into passage below * use CamelCase for all naming * naming conventions * maps (in th file) tobe meaningful, i.e. PyridinePassagePlan * scraps to follow map naming i.e. PyridinePassageP1, P2 etc. (or be distinct names) * Use UIS symbols styles: https://www.carto.net/neumann/caving/cave-symbols/cave_symbol.php?languageSelection=english CHANGES ------- * LabyrinthSP2 has reversed flowsone line with pillar (makes white blob)? outline -in removed * Included Pitch lengths for Frog Pot (entrance c9, Toad U So is 22m) * Included Pitch lengths for Church Pot (6m & 3M) * the 3d file output appears to have some duplicate surveys, needs fix and check therion, if it's been double counted in places the stats are going to be wrong - Aquamole and Frog Pot (th files have duplicate data and then additional in one) - DONE - COMMENTED OUT 1.0 to 1.28 IN AQUAMOLE - Goyden 2 and Gargett Way (th files look like they are the same) - DONE (GargettWay 1.16 onwards commented out, Goyden 2 1.0 to 1.16 commented out) - PlanHard (Astronomers) and new Astronmers - DONE * Added top level controlled legend.txt file so legend despcriptions can be turned on and off, amendments to name etc. * Digitised version of Turf Passage - Pitch * Digitised version of Old year added * Back Steps (and offset produce) added, no need for offset * Add label at bottom of Sump 8 - 1km / 2km to Nidd House Risings * Manchester Hole - Does the stream, go obvious route, via the duck to Sump 1. Sump2 etc (where does it reappear - this is not shown on the survey) - added otline route * Added an OSM image as an overlay, so no need for: - Need to survey riverbed from Guscott pot to beyond sinks for Manchester Hole (Check file GoydenSystemSurface.pdf in output, this uses an OSM map, alternative to manual survey of surface?) - Need to survey road from Limley farm entrance to far side of railway tunnel, incl sealed railway tunnel. (Check file GoydenSystemSurface.pdf in output, this uses an OSM map, alternative to manual survey of surface?) * Added a new SurfaceOverlay, digitised from OSM but using the Surface 1 data for points. (Temporary until new suface survey done?) - REDUNDANT, SEE ABOVE * Added Example GoogleEarth imagary embedded overlay as an example (to review / discuss) * Survey stats are including Surface data in the total. Need to exclude. - added "flags surface", some surface ones had it on, some not. * added in a number of 'presumed sumps' Static sump to pillar pot, SS to Goyden2, Main Inlet to 'Shakleton' * Change the line water symbols to point (L) * Added fault lines to Ne Goyden based on the ULSA / YURT survey. Included on overlays.th * Add TODO file at root level (this document) * Add XTherionFiles folder at root level for images / generic template call * Create global layout templates (custom_border, custom_lines, custom_scalebar) * Add call to generic template from nidderdale.thconfig * Added new surveys for OQP and Pigskin (turned off in thconfig) * Change name from "Nidderdale Plan" to "Goyden Cave System, Nidderdale, United Kingdom" - preferences? * Offset Eternal Optimest for clarity * Added map-comment, doc-author etc into nidderdale.thconfig (but needs moving into generic template) * Creative commons icon / licenses (into XTherionFiles) * added sump and water areas in Goyden2SP1, also left gap for october passage connection BUT scale of river not clear between Little Sump and Sump 2 * Tidied up gradients in Mud Hall (made all M) * hid cross section from Goyden3 * Labels (note: these will need review based on publications requirements and not all done) - All entrances capitals and XL (NEW GOYDEN) - All main named sections, XL (Crater Passage) - All comments / other, L (duck) - P99, c99 L - general offset labels from passage, and split over new lines - Change line label (Cap Left Crawl and Cap Left Crawl) to points (to discuss, I prefer lines but changed for consistency and to discuss - publications / scaling requirements) - Hidden New Goyden and Thrope entrance labels from Surface survey and added to respective section (for printing individual sections) - Added Frog Pot entrance label - Added Middle Sump, Downstream Sump 1, Planetarium and Astronomers label to NewGoyden and PlanHard - Added mudsumps and Clay Tunnel label to LabyrinthPlan.th2 section - moved labels from Eternal Optimist from main scraps into offset scrap (and removed connection wording) - added Guscott Pot labels - added Howgill Pot label to surface? No u/g survey? - added Dye Hard Inlet lable and 25m aven & dig * Digitise Goyden Downstream Sumps - done. I've equated in two points, sump start (New Goyden) and 1.69 in Aguamole. it creates some warp, but not as much if linked sump to Goyden. Probably as good as it will get without origianl data / re-survey - split into two, had to shorten one. there is obvious error in the old survey (either doubled up stations or scale was wrong on part of it. Error got progressively worse as reached end of survey / dive? * Digitise New Goyden Downstream Sumps - done. linked to point 1.59 on PlanHard. Included Caravan Trail as well, but had to link to same 1.59 and have not digitised as too small (circa 237m according to CDG - need good quality copy of survey)* Pyradine - A junction - DONE * extension beyond Hardy Pools sump - DIGITISED * Caravan Trail (CDG 112) - DIGITISED * October Passage - DIGITISED * Planetarium, added in new astronmers and avens, linked to 1.69. Added in slopes and boulders * List of surveyors or “Black Sheep Diggers”? - I've temporarily reverted to surveyors over BSD, as there was spelling mistake in one of them. List of surveyors better if ever want to do 'explo' stats etc.? * in nidderdale.th file create new map for surface scraps. This then can be controlled with a different colour in the thconfig * Review legend and hidden some options (rock edges, border, presumed border, x3 blocks, cross-section, flowstone) - mainly where multiples of same, can be reviewed in thconfig. * added presumed sump connection between Goyden2SP1 and GoydenSP1 * added LimleyLeadMine digitised. NEED accurate GPS * added pitch / length for Crater Chamber (9m) * Removde mud points (approx, 3 areas only) * 25m aven UP is using ceiling step down (as if looking from the top). Reversed * Made MUD SUMP a sump? (it's bailable, but decision to show as sump) * there is a cross-section (line) visible somewhere (as shows in legend).. Need to find it and hide. Didn't find it, so hidden all cross-sections. * add sump length and depth - Sump Index only has lengths * completed Caravan Trail Details * Need to add Grade 3 label for the sumps * added PublishSections.thconfig and new maps in nidderdale.th. * These are for Chris' publication requirements (x3 sections). Sections 1 and 2 'ready' but need review and the missing bits confirmed / surveyed! * created new line l_u_hydro for showing proposed connections on an overlay (use with line u and options -subtype hydro) * added an overlay - warning this generates "equate used to define new station" warning (can be ignored). There is probably a better way to do this.... * added proposed links (via on/off overlay) - eastern trunk route (Crater to Sump 8) - Bridge Hall to Guscott - October to Guscott - Guscott to North - Beet route to Frog * Agreed to move into Main Folders (Goyden / NewGoyden etc.). At present just folder hierarchy call for each, but could be moved into indexes in future.... * BSD logo (into XTherionFiles) - added into XtherionFile folder and added to main Nidderdale.pdf * Digitised Hardy Pools Sump extension, plus added detail into Hardy Pools * First duck and then climbs in roof in Clay Tunnel * Missing water flow points in various places * i.e water flow from Manchester to Goyden? * Removed output folders. All lower level now generate locally (may have missed a few - will error). Root > Output to be used only for NIdderdale (master survey) and 'distinct' caves (Goyden, New Goyden, TT etc.) - TBC * Renamed Beetroot to Beet Route on th2 (rename folders / files in long run?)